Shell method

The cylinder shell finite strip method of stability analysis for cylinder shell structure with prestress

柱壳结构外压稳定性分析的柱壳有限条元法

Curved shell finite element method for nonlinear stability problems of thin-walled steel members

薄壁钢构件非线性稳定问题的曲壳有限单元法

It is very hard to obtain the solution of acid hydrolysis FRP tank cover as stiffened composite plate and shell by analytical method.

酸解罐玻璃钢盖子作为加筋复合材料板壳，应用解析方法很难求解。

The comparison of prepolymer dispersing with inverted core shell method shows that the appearance of dispersion prepared by the former is clearer and the viscosity of that lower than by the later.

用预聚物分散法制得的PUA水分散液外观较清澈，其粘度低于核壳反转法制得的分散液。

Then, theory of nonlinear finite plate and shell element method are made clear.

接着，阐述了板壳问题的有限元原理，系统介绍了非线性有限元理论。

On Athenian Shell Banishment Method and Its Enlightenment

论雅典贝壳放逐法及启示

Thick Shell Element Method of Stress Analysis of Propeller Blades

螺旋桨桨叶固有动力特性方法研究螺旋桨强度的厚壳元分析

Static and Dynamic Analysis of Suspension Bridges Based on an Orthotropic Shell Finite Element Method

悬索桥静动力特性分析的有限板壳单元法

Comparison of the results based on these two different hypotheses shows that the orthotropic shell element method can predict the behavior of whole structures more accurately.

两种模型计算结果的对比分析表明，弹性正交异性板壳单元模型能更准确地分析结构的周期、内力、位移等参数。

With consideration of the top displacement, drift of story and micro-strain of longitude steel bars, the equivalent shell wall method has been presented in order to simplify the design of such type structure.

综合结构的顶点位移、层间转角以及钢筋的微应变，提出了适合于该结构体系简化设计的等效剪力墙法。

Double layer shell analogy method for ribbed flat shells

带肋扁壳的拟双层壳分析法

Analysis of Penetration Depth of Concrete – Piercing Shell and Its Method of Calculation

混凝土破障弹侵彻深度分析与计算方法

The effectiveness and accuracy of the present shell strip method is verified through two numerical examples of reinforced concrete slab and shell.

两个钢筋混凝土板壳算例的结果验证这种理论方法的有效性和准确度。

Disperse dye microcapsules were prepared by means of in site polymerization combined with multiple layer shell method.

采用原位聚合法结合多层造壁技术，对分散染料进行胶囊化。

In the process of analysis, firstly, cylindrical reticulated shells are equivalent to composite sandwich continuous shells by using the shell analogy method. Then, the plastic limit analysis of composite sandwich continuous shells is made.

在分析过程中，采用拟壳法将圆柱形网壳结构等效为连续的夹层壳，然后对等效夹层壳进行塑性极限分析。

The application of reticulated shell scaffold sliding method in large-span net rack construction

网壳式脚手架滑移法在大跨度网架中的应用

Measure Buckling Mode of Sectioned Thin Shell by Optical Method of Profilometry Measurement

形状测量的光学方法应用于组合薄壳的屈曲模态测量

CdS hollow spherical particles with different sizes have been prepared using core/ shell fabrication method with poly ( styrene acrylic acid) ( PSA) latex particles as a template.

以苯乙烯丙烯酸聚合物微球为模板，利用核/壳法制备了不同粒径的CdS中空球壳。

Finite cylinder shell element method for analysis of local stability of stiffener penstock

加劲环式压力钢管局部稳定性分析的有限柱壳单元法

Shell Theory Calculation Method of Simply Supported U-shaped Trough

简支式U形槽身壳体理论计算法

Public Right Consciousness in the View of Comparison& Viewed from Athenian Shell Banishment Method

比较视野下的公共权力意识&从贝壳放逐法说起

This paper outlined an analysis of a skewed box calvert by thick shell finite element method.

本文提出了斜交箱形涵桥厚壳元分析方法.

The shell analogy method of lattice flat shell or rib flat shell is the special case of the proposed method.

对于一般网状扁壳的拟壳分析法及带肋扁壳的拟壳分析法分别属于本文的两种特殊情况。

Drift shell tracing method and the secular variation of inner radiation fluxes

漂移壳追踪方法与内辐射带的长期变化

Review of infrared shell temperature measuring method on rotary kilns

回转窑表面温度红外检测法综述

To validate the present approach, an example of two-cell curved box beam is given. The numerical results of this paper agree well with the predictions of finite shell element method and experimental results.

作为验证，在算例中对一双室曲线薄壁箱型梁模型的静力特性进行了分析，并将本文数值结果与试验结果和板壳有限元方法所得结果进行比较后证明了本文方法是有效的。

Three-dimensional analysis of thick shell by semi-analytical method

厚壳三维分析的半解析解

This paper presented a new method, the Radon shell graphic method, it was based on the property of Radon transform and the general formula for the exact 3D CT image reconstruction from the cone beam projection.

基于3D Radon变换的性质和三维锥束CT精确图像重建的一般公式，提出了一种在锥束源点轨迹给出之后确定物体精确重建域（ERR）的方法&Radon壳图解法。

Manufacture of Forehand Plate of Air-conditioner Compressor for Car by Shell Mold Method

车用空调器压缩机前端板铸件壳型铸造工艺实践

Post-buckling analysis of web plates of girders by curved shell element method

焊接组合梁腹板屈曲后性能的曲壳有限元分析